MAPETHENE LT
Šaltuoju būdu klijuojama (savalipė) bituminė hidroizoliacinė membrana, armuota didelio tankio HDPE plėvele. Skirta požeminių konstrukcijų hidroizoliacijai ir tinkama dirbti esant temperatūroms iki -5°C
WHERE TO USE
Mapethene LT is a self-adhesive bitumen membrane made from a mixture of bitumen and special polymers bonded to a double laminated lm of high density polyethylene (HDPE).
Mapethene LT is used to waterproof the outside of concrete, brick and block-built foundations, cellars and underground garages.
ADVANTAGES
- Mapethene LT is applied cold in complete safety, without using ames.
- Highly exible; simple, quick and easy to apply.
- Adheres perfectly to substrates. Thanks to the use of Mapethene Primer W and Plastimul Primer SB it may be applied at low temperatures and on slightly damp substrates.
- Vulcanized side strip to improve water-tightness at overlaps.
- Good crack-bridging properties once applied.
- Impermeable up to a pressure of 8 bar.
- Preformed membrane; more control on its thickness during production and total uniformity of the mix.
- Mapethene LT membranes are impermeable to radon and methane.
TECHNICAL CHARACTERISTICS
Mapethene LT is a self-adhesive preformed bitumen waterproong membrane made from a special mixture of bitumen admixed with polymers. When bonded to high-strength HDPE lm, it forms an impermeable sheet resistant to tearing. The special mixture used to make Mapethene LT allows the product to be applied in the winter at temperatures as low as -5°C. In hot weather, use Mapethene HT, which has a special bitumen mix that has been specifically developed for application in hot conditions and is just as easy to apply. Once it has been applied Mapethene LT is immediately waterproof, including sudden rainfall. Mapethene LT does not contain solvent. Mapethene LT meets the requirements of EN 13969 (“Bitumen membranes to prevent rising damp from the ground”) and EN 14967 (“Bitumen membranes for walls to prevent rising damp from the ground”). Mapethene LT may be used to waterproof underground structures in compliance with DIN 18533 part 2, class W1-E (moisture from the ground) and class W4-E (rainwater or rising damp in walls in contact with the ground).
RECOMMENDATIONS
Do not use Mapethene LT in the following cases:
- during rainy weather;
- on substrates with condensation or free-standing water on the surface;
- without a protective layer if exposed to direct mechanical loads;
- transport and store Mapethene LT vertically.
Cleaning: Clean hands with lukewarm water and tools with water or thinners.
Packaging: Supplied in 20 m² rolls (width 1 m).
Storage: Mapethene LT may be stored for 12 months in its original packaging. Protect from freezing weather.
Width (mm): 1000 (975 + 25 vulcanised strip)
Thickness (mm): 1.5
Weight (kg/m²): 1.5
Application temperature: -5°C to +20°C
Impermeable to water (bar): 8
Radon gas diffusion coefcient (m²s-1): 1.49 E-13
Permeability to methane gas (ISO 7229) (ml/m²·24 h·atm): 360
Daugiau informacijos galite rasti Techninių duomenų lape (TDL).
MAPETHENE LT
Šaltuoju būdu klijuojama (savalipė) bituminė hidroizoliacinė membrana, armuota didelio tankio HDPE plėvele. Skirta požeminių konstrukcijų hidroizoliacijai ir tinkama dirbti esant temperatūroms iki -5°C
WHERE TO USE
Mapethene LT is a self-adhesive bitumen membrane made from a mixture of bitumen and special polymers bonded to a double laminated lm of high density polyethylene (HDPE).
Mapethene LT is used to waterproof the outside of concrete, brick and block-built foundations, cellars and underground garages.
ADVANTAGES
- Mapethene LT is applied cold in complete safety, without using ames.
- Highly exible; simple, quick and easy to apply.
- Adheres perfectly to substrates. Thanks to the use of Mapethene Primer W and Plastimul Primer SB it may be applied at low temperatures and on slightly damp substrates.
- Vulcanized side strip to improve water-tightness at overlaps.
- Good crack-bridging properties once applied.
- Impermeable up to a pressure of 8 bar.
- Preformed membrane; more control on its thickness during production and total uniformity of the mix.
- Mapethene LT membranes are impermeable to radon and methane.
TECHNICAL CHARACTERISTICS
Mapethene LT is a self-adhesive preformed bitumen waterproong membrane made from a special mixture of bitumen admixed with polymers. When bonded to high-strength HDPE lm, it forms an impermeable sheet resistant to tearing. The special mixture used to make Mapethene LT allows the product to be applied in the winter at temperatures as low as -5°C. In hot weather, use Mapethene HT, which has a special bitumen mix that has been specifically developed for application in hot conditions and is just as easy to apply. Once it has been applied Mapethene LT is immediately waterproof, including sudden rainfall. Mapethene LT does not contain solvent. Mapethene LT meets the requirements of EN 13969 (“Bitumen membranes to prevent rising damp from the ground”) and EN 14967 (“Bitumen membranes for walls to prevent rising damp from the ground”). Mapethene LT may be used to waterproof underground structures in compliance with DIN 18533 part 2, class W1-E (moisture from the ground) and class W4-E (rainwater or rising damp in walls in contact with the ground).
RECOMMENDATIONS
Do not use Mapethene LT in the following cases:
- during rainy weather;
- on substrates with condensation or free-standing water on the surface;
- without a protective layer if exposed to direct mechanical loads;
- transport and store Mapethene LT vertically.
Cleaning: Clean hands with lukewarm water and tools with water or thinners.
Packaging: Supplied in 20 m² rolls (width 1 m).
Storage: Mapethene LT may be stored for 12 months in its original packaging. Protect from freezing weather.
Width (mm): 1000 (975 + 25 vulcanised strip)
Thickness (mm): 1.5
Weight (kg/m²): 1.5
Application temperature: -5°C to +20°C
Impermeable to water (bar): 8
Radon gas diffusion coefcient (m²s-1): 1.49 E-13
Permeability to methane gas (ISO 7229) (ml/m²·24 h·atm): 360
Daugiau informacijos galite rasti Techninių duomenų lape (TDL).
Kur įsigyti